Greeting!!
There are many doubts about the safe of grow indoor inside the closets...
For example my grow indoor have 2 CFL 150W and they are too hot in this summer. I have a fan as well but it can't refresh too much.
Anybody have been a origin of fire in your grow indoor?
Cheers
Enjoy!
Fear of fire grow indoor
- Fred Lemonjello
- Posts: 66
- Joined: Wed 27th Dec 2006 04:20 am
- Location: Me..? I'm with them. . 3 trips = 18 days in A'Dam!
The main issues with fires and growing are people tend to over-load an extension cord, wall outlet or the circuit breaker.
Also electrical items and water do not mix!
Hillbilly wiring is also a major contributor to fires. If you don't know what you're doing, DO NOT DO IT!
Keep flammable items away from bulbs, ballasts, motors and plug-ins.
It's also beneficial for your plants to keep your cabinet, closet or room below 85f degrees.
Be safe!
Fred
Also electrical items and water do not mix!
Hillbilly wiring is also a major contributor to fires. If you don't know what you're doing, DO NOT DO IT!
Keep flammable items away from bulbs, ballasts, motors and plug-ins.
It's also beneficial for your plants to keep your cabinet, closet or room below 85f degrees.
Be safe!
Fred
4th Trip~ 19-30 Nov 2009
- Boner
- Posts: 9996
- Joined: Thu 7th Apr 2005 12:07 am
- Location: Anywhere but here...
- Toker70
- Posts: 1390
- Joined: Sun 21st Sep 2008 03:16 pm
- Location: Cork,EIRE
- Contact:
- cheese
- Posts: 1129
- Joined: Tue 14th Nov 2006 04:41 pm
- Fred Lemonjello
- Posts: 66
- Joined: Wed 27th Dec 2006 04:20 am
- Location: Me..? I'm with them. . 3 trips = 18 days in A'Dam!
DOH!!
Here's one I did last year. WTF was I thinking!
I was like.... WTF why is the 1,000 watt lamp going on and off.... replaced with new lamp..... WTF? still not working properly!
Checked all wiring back to breaker box...... DOH... found the problem.
Right above the breaker box I had coiled up the extra 10/2 wire leading to the ballast..... it took a few months but eventually arched/ melted thru the plastic covers. Not a pretty sight let me tell you!
Always leave space in-between all LIVE wires, do not coil LIVE wire or extension cords!
Fred
Here's one I did last year. WTF was I thinking!
I was like.... WTF why is the 1,000 watt lamp going on and off.... replaced with new lamp..... WTF? still not working properly!
Checked all wiring back to breaker box...... DOH... found the problem.
Right above the breaker box I had coiled up the extra 10/2 wire leading to the ballast..... it took a few months but eventually arched/ melted thru the plastic covers. Not a pretty sight let me tell you!
Always leave space in-between all LIVE wires, do not coil LIVE wire or extension cords!
Fred
4th Trip~ 19-30 Nov 2009